Doetsch Off-Road 2007-2018 Jeep JK 2.5 Ton 2in 7075 Aluminum Tie Rod and Drag Link Steering Kit
ALL ORDERS ARE SHIPPED ADULT SIGNATURE REQUIRED - NO EXCEPTIONS. YOU WILL BE CHARGED FOR ADDITONAL SHIPPING ON ALL RETURN ORDERS WHERE A SIGNATURE COULD NOT BE ACQUIRED. PLEASE ENSURE YOUR SHIP TO ADDRESS WILL HAVE AN ADULT AVAILABLE FOR SIGNATURE, SUCH AS AT A BUSINESS.
SHIPPING IS ONLY AVAILABLE WITHIN THE CONTINENTAL US - NO HAWAII, ALASKA, PUERTO RICO, CANADA OR INTERNATIONAL DUE TO SIZE AND WEIGHT
DUE TO THE HIGH VOLUME OF ORDERS, CURRENT ORDER PROCESSING TIME IS 10-15 BUSINESS DAYS PLUS SHIPPING TIME. WE WILL EMAIL TRACKING INFORMATION AS SOON AS IT BECOMES AVAILABLE. IF YOU NEED EXPEDITED SHIPPING, THEN PLEASE CALL US DIRECTLY AT 480-848-8482 TO ARRANGE!
2007-2018 JEEP WRANGLER JK/JKU COMPLETE STEERING KIT (TIE ROD AND DRAG LINK) - OFFERED AS UNDERSTEER OR AS A "FLIP" KIT (SELECTR FROM DROP DOWN)
WE MANUFACTURE OUR OWN 7075 ALUMINUM BARS AND DO NOT RESELL ANYONE ELSE'S. MANUFACTURED IN ARIZONA, USA!!
INSTALLATION INSTRUCTIONS - https://doetschoffroad.com/p/instructions
Here is your solution for the industry's STRONGEST, MOST AFFORDABLE, HEAVY DUTY aluminum tie rod and drag link kit for the 2007-2018 Jeep Wrangler JK/JKU!!!
Our tie rod and drag link bars are made from 2in diameter solid 7075 aluminum
which acts as a "memory metal" - meaning even after it has been bent,
it will spring back into it's original linear shape, keeping you moving
down the street or trail! We're so confident in the strength of our
steering, we offer a limited LIFETIME warranty on the bars!!!! We also
machined wrench flats into each end of the bar, so that you can easily
get a wrench on it for adjustment.
The threaded 1.25" FORGED joints we use are MADE IN THE USA, zinc coated for corrosion protection, fully greasable AND feature an OEM style offset that helps to clear your suspension
and other components as your steering cycles. We use opposing left and
right hand threads so that you can also make front toe adjustments without
having to remove the tie rod from the knuckles. The same goes for the
drag link, so that you can re-center your steering wheel.
Here's what you get for $799.99 -
- 2" diameter 7075 aluminum Heavy Duty Tie Rod with a Limited LIFETIME Warranty
- 2" diameter 7075 aluminum Heavy Duty Drag Link with a Limited LIFETIME Warranty
- Greasable 1.25in Threaded Zinc Plated Forged Adjustable Ends with corresponding left/right hand jam nuts
KIT STYLE (Select from Drop-Down Menu):
- If you have less than 3" of lift, select "UNDERSTEER"
- If you have 3"+ of lift, select "FLIP KIT"
Clamp Options (Select from Drop-Down Menu):
- Add $0 NO CLAMP
- Add $99, Doetsch Off-Road 2" Heavy Duty Double Sheer Tie Rod Steering Stabilizer clamp, black finish and MADE IN THE USA!! Works with nearly any aftermarket steering stabilizer or hydro assist kit that utilizes a 1/2" eyelet. Please note the factory/OEM steering stabilizer is not compatible with our 2" clamp and a standard 1-3/8" or 1-5/8" stabilizer clamp will NOT fit our 2" tie rod.
*The Limited Lifetime warranty on the aluminum bars (defined as the tie rod bar and drag link bar) covers one (1) replacement due to bending only (bending is defined as 3/8" or more of deflection as measured across the horizontal plane of the bar, during the lifetime of the product and only to the original purchaser with valid proof of purchase. This warranty is limited to the replacement of the bar and does not include shipping, installation or any other incidental or consequential loss as a result of product failure. All warranty claims must include photos and measurements of the bend, sent to firstname.lastname@example.org. Abuse beyond normal wear and tear may void this warranty, including but not limited to using the bars as a tie down point for towing or recovery. At our discretion, we may require that the bar is shipped back to us (at your expense) for further quality assurance assessment. We reserve the right to revoke this Limited Lifetime Warranty at any time, without notice to you. There is no warranty on the tie rod ends, grease boots, cotter pins or zerk fittings.
*If you're local in Arizona, we provide full professional installation of this kit for an additional
cost. Give us a call or stop by so that we can discuss options and
verify exactly what you need!
*We offer both the tie rod and drag link separately if you already have one or the other, so just give us a call for a quote on what parts you need!
*We stock and sell replacement tie rod ends that will fit almost ANY aluminum 2.5 ton steering kit, even if it is not our kit, just in case you need replacement parts.
*This is a NO DRILL understeer kit which means it will mount similar to your original factory steering, meaning your passenger side drag link mounting location is UNDER the knuckle.
*A raised track bar bracket is required in order to use the drag link flip kit.
This maintains proper geometry between the drag link and track bar on
*The flip kit requires aftermarket wheel backspacing of 4.5" or less. If you are running OEM wheels, then 1.5" wheel spacers are available through us and will be required.
*Aluminum tie rod and drag link come raw as standard and may have slight imperfections in the finish which is not a warranty-able claim, custom paint/powdercoat is available for an additional charge.
*Free store pick up or nominal oversized shipping fee included at checkout
*For shipping, please allow 2-3 business days processing time once your order is placed. We currently ship via FedEx and approximate normal delivery between 3-7 business days, once shipped (not including processing time). You may receive two (2) boxes - one with the rod ends, hardware pack and clamp (if applicable) and one with the two aluminum bars. These boxes may arrive at different times with different tracking numbers.
*Please provide a valid email address during checkout, so that we can send tracking numbers once shipped. If you need expedited delivery, please call us at 480-848-8482 BEFORE you place your order, so that we can quote you an expedited shipping cost.